–>

MakerHawk I2C OLED Display Module 1.5inch OLED Module with 128×128 Pixels, 16-bit Grey Level and Internal Controller…

$13.99

Make sure this fits by entering your model number.
Attention: Development resources and manual (examples for Raspberry Pi/Arduino/STM32): https://www.waveshare.com/wiki/1.5inch_OLED_Module​​​​​​​; If you does’t see these documents when open the link, pls search 1.5inch_OLED_Module on this page. Library: https://github.com/olikraus/u8g2.
High resolution – 128×128 high resolution, clearer display.

Category:
Size Name:1.5 Inch  |  Colour Name:As Shown

I2C OLED Display Module 1.5inch OLED Module with 128×128 Pixels, 16-bit Grey Level and Internal Controller, with SPI/I2C interface, DC 3.3V/ 5V for Arduino

Description:
This is a general OLED display Module, 1.5inch diagonal, 128×128 pixels, 16-bit grey level, with embedded controller, communicating via SPI or I2C interface.

Features:
128×128 high resolution, clearer display.
Supports for 16-bit grey level display which makes the sense of depth of the picture more stronger and more realistic
Support SPI and I2C interface, so that you can choose the communication way through the resistance.
Development resources and manual (examples for Raspberry Pi/Arduino/STM32): https://www.waveshare.com/wiki/1.5inch_OLED_Module

Specifications:

Driver chip: SSD1327
Support Interface: SPI / I2C
Display color: White
Grey level: 16-bit
High resolution: 128 × 128 (most other competitive products are typically 128×64)
Viewing angle: andgt;160°
Operating voltage: 3.3V / 5V
Module Size: 44.5 x 37 (mm)

Package Including
1 * 1.5 inch OLED module
1 * PH2.0 7PIN cable

Make sure this fits by entering your model number.
Attention: Development resources and manual (examples for Raspberry Pi/Arduino/STM32): https://www.waveshare.com/wiki/1.5inch_OLED_Module​​​​​​​; If you does’t see these documents when open the link, pls search 1.5inch_OLED_Module on this page. Library: https://github.com/olikraus/u8g2.
High resolution – 128×128 high resolution, clearer display.
16-bit grey level, better display effect – Supports for 16-bit grey level display which makes the sense of depth of the picture more stronger and more realistic
Support Interface: SPI / I2C – Support SPI and I2C interface, so that you can choose the communication way through the resistance.
Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32)
[amz_corss_sell asin=”B07BDMG2DK”]

Brand

Reviews

There are no reviews yet.

Be the first to review “MakerHawk I2C OLED Display Module 1.5inch OLED Module with 128×128 Pixels, 16-bit Grey Level and Internal Controller…”

Your email address will not be published. Required fields are marked *

Scroll to Top